Technical Product Bulletin FOOD & DRUG APPLICATION EPOXY ADHESIVE PRODUCT
DESCRIPTION: AA-BOND FDA22 is a high viscosity epoxy resin
system specifically developed for bonding and coating applications in
accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug
Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300. AA-BOND FDA22 is two-parts tan adhesive is easily mixed, used and cured
at room temperature for bonding, laminating and repair applications by
manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical
instruments and devices. AA-BOND FDA22 is an effective electrical
insulator, and it provides low permeability to gases and vapors, and good
resistance to water, weather, galvanic action, to petroleum solvents,
lubricants and fuels, to mild acids and alkalis and to many other organic and
inorganic compounds. PRODUCT
DESCRIPTIONS: Appearance Light Tan Cure Type Heat cure or Room temperature Benefits · High viscosity · Easily mixed · Electrical
insulator · Low permeability · Good resistance Mix Ratio by weight 100:40 / Resin:Hardener Substrates Most metals, ceramic, glass and
plastics Operating Temperature -70 to 145 °C Typical Applications -Bonding -Laminating -Repair applications by manufacturers
of: · Food preparation · Processing and
packaging · Catheters · Hearing aids · Dental products · Other
biomedical instruments and devices. UNCURED
PROPERTIES: Viscosity @ 25 °C cps 27,000 Thixotropic Index 1.2 Specific Gravity, mixed 1.44 Reactive solids contents, % 100 Pot Life 3 hours CURED PROPERTIES: Hardness, Shore D 78 CTE, Linear 26.1 µin/in-°F Dielectric strength kv/in 420 Volume Resistivity ohm-cm 1.50e+14 Elongation at Yield 5.0 % Adhesive Bond Strength 2100 psi ( Lap shear, alum to alum) ELECTRICAL
PROPERTIES: Volume Resistivity 1.50e+14 ohm-cm Dielectric Constant 3 .5 @Frequency
1000 Hz Dielectric Strength 420 kV/in Dissipation Factor 0.020 @Frequency
1000 Hz CURE SCHEDULE: 1-4 Hours @ 65°C 24 to 36 Hours @ 25°C GENERAL INFORMATION: For safe
handling information on this product, consult the Material
Safety Data Sheet, (MSDS). HOW TO USE: 1. 1- Carefully clean and dry all surfaces
to be bonded. 2 - Apply AA-BOND FDA22 completely mixed adhesive to the prepared surfaces,
and gently press these surfaces together. Contact
pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3- Some separation of components is
common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4- Some
ingredients in this formulation provided may crystallize when subjected to low
temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react
as well as liquid components and should be re-dissolved prior to use for
best results. AVAILABILITY: This epoxy can be supplied in many different
packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application