SKU: N/AThis site contains affiliate links for which we may be compensated
Health & Beauty / Medical & Mobility / Daily Living Aids / Hearing Assistance / Hearing Aid Parts
These receivers are used on the Phonak, Unitron, Hansatone, and Relate Hearing Aids. S - Standard receivers are the least powerful. Used for mild to moderate hearing losses. They are available in sizes 0, 1, 2 & 3. M - Medium receivers are the middle power level. Used for moderate to moderately severe hearing losses. They are available in sizes 0, 1, 2 & 3. P - Power receivers are the most powerful. Used for moderately severe to severe hearing losses. They are available in sizes 0, 1, 2 & 3. PLEASE NOTE: It is essential that you do not change the power level of the receiver without a visit to your hearing healthcare specialist for programming changes. If done, it will change the volume levels and frequency response of the hearing aids. This will result in a reduction in sound quality and the potential to cause further damage to your hearing. The higher the number on the receiver, the longer the tubing will be. If you have a receiver, the size you need will be printed in blue or red on the end where the dome connects. (You may need a magnifying glass and good lighting to see this). Find information and links to Domes under the Related Products tab.Note: All Tube orders are non-refundable. The tip on the right receiver wire is red, and the tip on the left receiver is blue. The other end of the receiver has three gold pins, rather than two on previous versions. Therefore older receivers are not compatible with newer hearing aids, and the new 4.0 Phonak receivers are not compatible with older models. The Receiver cannot be used by itself – it requires a compatible hearing aid.